سمی کالکشن
سمی کالکشن
برای انواع مختلف مو
مناسب موخوره
افزایش درخشندگی
What it is:
The only straightener with flexing plates that shape to gather hair. Use corded or cord-free.
Flexing manganese copper alloy plates shape around your hair. This extra control allows you to create the same style but with less heat - and half the damage.*
Key benefits:
- Cord-free, with the thermal performance of a corded straightener
- 50 percent less breakage*
- Less frizz and fewer flyaways**
Key features:
Suitable for all hair types: Three precise heat settings (330°F, 365°F and 410°F) to suit your hair type, length and desired style.
Manganese copper plates: Manganese copper alloy selected for its flexibility, strength, and thermal conduction.
Up to 30 minutes cord-free styling***: Delivers the same thermal performance of a corded straightener. Fully recharges in just 70 minutes.
Engineered for balance: Weight is balanced in the hand to give maximum control while styling.
OLED Screen: Displays battery level, temperature control and charging status during use.
Auto shut-off and Safety lock: Switches off after 10 minutes of inactivity for added peace of mind. Safety lock allows for immediate storage after use.
Ready to travel: Universal voltage and a battery disabler that is TSA-approved and safe to fly with.
If you want to know more…
Enhanced styling: By gathering hair for more control, flexing plates produce shiny, straight results—with less frizz and fewer flyaways**.
Intelligent heat control: Regulates the temperature of the plates 100 times a second, ensuring you never exceed your chosen temperature.
Less heat, half the damage*: Flexing plates gather your hair for more control, so you can achieve the same style with less heat and 50 percent less breakage*.
Flexing Plates: The only straightener with flexing plates that shape around your hair, gathering it neatly together on each pass. By gathering hair for more control, this allows for a lighter grip when styling.
Ready to style when you are: With 90 percent battery charge in just 40 minutes, using the magnetic charging cable or dock.
Maximize run time with Charging dock: Place your Dyson Corrale™ straightener in the dock when not in use and in between sections to extend run time. The OLED screen and chime will indicate that your machine is charging properly.
Key sounds: Chimes to indicate your machine is heating up, chosen temperature reached, low battery, empty battery, charging, idle mode and service alerts. To turn off the prompt sounds, mute by holding the power and temperature buttons for five seconds.
Specifications:
Machine Weight: 1.23 lbs
3 heat settings: 330°F, 365°F, 410°F
Cord-free run time: Up to 30 minutes***
Charge time (90%): 40 min
Charge time (to full): 70 min
Battery: 4-cell lithium-ion battery
Flexing plates: Flexing manganese copper alloy plates shape to gather hair.
Wattage: 200 W
OLED screen: Battery, temperature and charging status displayed.
Cable Length: 10.9 ft
Universal Voltage: 10.8V-16.8V
Machine Height: 1.8in
Machine Length: 11.5 in
Machine Width: 1.6in
*Thermal damage measured by hair strength, when creating an equivalent hair style. Tested on flexing plates vs solid plates.
**Direct image analysis vs untreated hair.
***Exact run time may vary based on hair type and styling technique.
Getting started with your Dyson Corrale™ Straightener:
-Before using, charge your straightener to 100% to maximize performance.
-Gently slide instructions off of the machine before inserting the flight-ready tag. Should the flight-ready tag detach from the machine, hold the end of the cord with your fingers or tweezers and push the barbed end back into the hole on the machine.
-Press and hold the power button until you hear a chime.
-Use the + or - button to select your desired styling temperature. You will hear another chime when Corrale reaches your desired temperature.
-Use the dock with cable attached and place Corrale on the dock between sections and when not in use to extend run time.
-Press and hold the power button to turn Corrale off and place in the charging dock so that it is fully charged for your next styling session.
-To maximize your run-time, always start from 100 percent charge and place Corrale on the dock between sections and when not in use.
-Before flying with Corrale, place the machine in flight ready mode by disconnecting the flight ready tab.
-When on the go, place in heat-resistant travel pouch.
Tips for smoothing:
-Start with completely dry hair.
-Begin with Medium Heat (365 degrees) and adjust up or down depending on your hair type and texture.
-Select one- to two-inch sections of hair (depending on hair density) for best performance.
-Smooth hair in a single, fluid motion from roots to ends.
-Create additional details such as beveled ends by rotating 45 to 90 degrees inward or outward as you smooth ends of hair.
-To help get closer to the root, take sections at an angle.
-For finer hairline areas, reduce temperature.
-Finish with your favorite styling products.
Tips for curls and waves:
-Start with completely dry hair.
-Begin with Medium Heat (365 degrees) and adjust up or down depending on your hair type and texture.
-Select one- to one-and-a-half-inch sections of hair (depending on hair density) for best performance.
-Clamp the section of hair and rotate the iron one full turn (for curls) or half turn (for softer waves) in the
-direction you want to curl.
-Immediately begin sliding the iron to the ends of the section.
-Finish with your favorite styling products.
